(1) Enter BIOS -> Select [Boot] -> Select USB drive/CD-ROM under the [Boot Override] options( 2 ) Enter BIOS -> Select [Boot] -> Change the boot device priority so that your USB drive/CD-ROM is the first boot device. (3) Hold and press the [F8] key while you press the power button to turn on the system.
Select Windows 10 USB drive to enter Windows 10 setup interface Follow the installation instruction, the system should enter the storage setting interface, the bottom of screen should display a message “We couldn’t find any drives. To get a storage driver, click Load driver.” Click on Load driver.
Way 2 : Download ISO File and Burn Windows ISO to USBStart USB bootable software free download for all Windows. Here, go to get Rufus from its official website. Run this ISO to USB burning tool, and then plug your USB flash drive to your PC. This tool will detect your USB flash drive. Later, the tool will start to burn ISO to USB flash drive, which will take a few minutes.
How to set computer to boot from USB drive?
Method 1 : Set computer Boot from USB device by Boot Menu. Disable Secure Boot in Security after you enter BIOS window with BIOS/UEFI key. Or choose UEFI Only in Startup – UEFI/Legacy Boot, and set CSM as YES. Press F10 to save setting changes, restart computer and enter BIOS menu with Boot option key in the following table.
How to fix Windows 10 installation error – no drives found?
To find the storage driver, click Load driver. No drives were found. Click Load Driver to provide a mass storage driver for installation. Don’t be freaked out since you’ve got a lot of companions. You should try to fix this Windows 10 installation error by simply selecting a drive to install the OS.
If Windows does not find any drives during the install, please use the instructions below to resolve the issue. 1) Prepare a USB drive with bootable USB drive for Windows 10. 2) Download the Intel VMD driver and save it to the Windows 10 USB drive from the Acer Drivers and Manuals page.
Why is the disk not detected by the Windows Installer?
If the disk that is not detected by the Windows installer is a Raid Array, you should bear in mind that this error is relatively common and is solved using a USB or CD / DVD to install an updated version of the RAID drivers according to your motherboard model and its socket, either AMD or Intel.