You can pair your Pixel Buds to a Windows device by putting your Pixel Buds in their case and pressing and holding the case button for 3 seconds. Once a the light is flashing white, you can find your Pixel Buds in your device’s bluetooth menu.
Open the Pixel Buds case with the Pixel Buds inside near your computer. Tap and hold the button on the small button on the back of the case for about 3 seconds until the LED on the front starts to blink (this indicates they are in pairing mode). Now, on your Windows computer, click on the search box at the bottom left and type in Bluetooth.
This begs the inquiry “How to connect Pixel Buds to PC?”
1 make sure your buds are not connected to any other devices 2 Just open the case, with the buds still inside 3 Hold the button inside the case for 3 seconds (a white LED will flash continuously) 4 Go to setting > devices > add Bluetooth or other devices on your PC 5 locate your pixel buds and pair 6 Enjoy!
How to fix Google Pixel Buds not pairing?
Unpack Pixel Buds If there’s a protective film between the earbuds and the case, remove that before charging. Charge Pixel Buds Before setting up your Google Pixel Buds, charge them in the case with the lid closed for 10 minutes. If you see a pulsing orange LED, your device battery is low and not ready to pair.
Google Pixel Buds can be paired to a total of 8 devices. If you want to connect your Google Pixel Buds to an additional phone or simply change the phone they’re currently connected to, place them in the charging case, and once the green LED is visible, hold the case button for three seconds to put them in pairing mode.
Can I use my Pixel Buds as a normal headset?
You’ll still be able to listen to media and use the microphone, just like a normal headset. You can pair your Pixel Buds to a Windows device by putting your Pixel Buds in their case and pressing and holding the case button for 3 seconds.